Aluminium Roll Jacketing Malaysia : The Ultimate Protection for Mechanical Insulation Systems

Aluminium Roll Jacketing is the premier protective outer surface for mechanical insulation systems including pipes, vessels, and other equipment. It protects the insulation and underlying pipes/vessels from physical damage, UV exposure, corrosive atmospheres, and water.

Aluminium Roll Jacketing (also called cladding) is available in smooth, stucco embossed, and 3/16 corrugated (cross-crimped) finishes. For larger surfaces, box-rib and deep corrugated sheets are also available. Aluminium Roll Jacketing has a bare outer surface and features a standard 3 mil thick poly film moisture barrier heat-laminated to the interior surface that helps prevent corrosion of the jacketing and the underlying metal pipe, vessel, or equipment.

Aluminium Roll Jacketing is typically manufactured using alloys 3105 or 3003 which have very similar composition and performance and are considered interchangeable for use as insulation jacketing. Both bare and polysurlyn lined Aluminium Roll Jacketing comply with the requirements of the ASTM Aluminium Jacketing Material standard, C1729, which includes the strength and chemical composition requirements for compliance to ASTM B209 (Aluminum Alloy Standard).

RECOMMENDED USES : 

Aluminium Roll Jacketing is recommended for use in all of the following Insulation system applications:

• Standard outdoor use on all pipe and vessel insulation systems up to 8 ft. outer diameter
• Indoor insulation system applications up to 8 ft. outer diameter where increased damage resistance is desired

RECOMMENDED THICKNESS :

The thickness of the Aluminium Roll Jacketing may vary based on the outer diameter of the insulation system per the requirements of ASTM C1729. This recommended thickness is shown in the table.